Loading the content... Loading depends on your connection speed!
Specification
• Automatic threshold (door bottom) seal with a high efficiency mechanism.
• The seal is lifted clear of the floor as soon as the door is opened by a few mil-limetres – resulting in exceptionally low door operating forces.
• Requires no power connection.
• Self-levelling.
• Tested in accordance with BS EN ISO 140-3: 1995.
• Meets smoke leakage performance requirements of BS 5588.
• Certified CF136.
• Weighted Sound Reduction Index (Rw): 37dB.
Finish
• Anodised aluminium with silver end plates, and grey silicone rubber gasket.
Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.
A vertical sliding service hatch supplied as one assembly mounted on a steel backplate for
surface fixing to doors.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
A vision panel specifically designed for dirty protest cell doors. It allows dirty lenses to be wiped clean to view into the cell and also provides a system to safely remove soiled lenses from the vision panel and replace with clean.
Specification
• Solid machined aluminium construction.
• Complies with NOMS specifications.
• Sliding privacy cover.
• 225mm high x 60mm wide clear vision.
Specification
• Flexible elastomeric fin material springs back to original shape to provide ongo-ing performance and durability in service.
• Symmetrical design ensures fins are always in contact with two surfaces of the door leaf, creating an air chamber to provide excellent acoustic properties.
• Aggressive self-adhesive backing tested on many surfaces, including MDF.
• Effective smoke seal up to 200°C.
• Certified CF136.
• Weighted Sound Reduction (Rw): 31dB.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
A robust secure stainless steel wall shelf incorporating ‘snap hooks’ which collapse under
a pre-set load to prevent ligature attachment. Suitable for use within a prison cell.
Specification
• Secured to the wall with tamper proof expansion bolts.
• Three load adjustable snap hooks supplied as standard secured to the shelf
from the rear to prevent tampering.
Specification
• Mirror frame 22mm thick constructed in one piece without joints or crevices from solid composite material.
• A smooth finish to all external surfaces that is hygienic, easy to clean and resistant to scale build-up and deposits.
• 3mm thick Polycarbonate mirror backed with 6mm MDF with a scratch resistant coating.
• Available in 250mm x 350mm and 500mm x 650mm.
• Intended to be secured to the wall with Gripfast or structural adhesive and pointed around the edges with anti-pick mastic.
Electro-Mechanical Mortice Lock
To provide secure locking of swinging passage / control doors using third party secu-rity management systems (SMS) or conventional key control. Designed to enable key and electric operation from both sides of the door. This lock is specifically designed for very high use applications; typically securing perimeter doors and main access routes.
Specification
• Solid Case Technology; Lock case machined from single piece carbon steel block.
• Steel main bolt, with carbide anti-cuffing rollers and 25mm throw.
• Supplied with “T” Handle as standard.
• Unique dual solenoid electric locking latch.
• Independent 8-lever locking mechanism.
• Lock provides status monitoring of critical functions and tamper.
• Integral baffle arrangements to resist manipulation and interference via the keyhole.
• Dedicated key profile operates 3R63 group of locks only.
To provide a means of securing wooden doors on offices and rooms where a range of suiting options is required, and/or where a high degree of protection against all known forms of vandal attack is needed.
Specification
• Steel Body.
• Brass dead bolt with 14mm bolt throw.
• Anti-padsaw steel rollers.
• 5 detainer mechanism with thousands of key combinations.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
• Optional micro-switches for alarm systems integration.
• Can be suited as part of a master keyed system.
• Certified to B53621.
The Medicine Cabinet is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.
Specification
• High security cabinet for the safekeeping of controlled drugs / medicines.
• 4mm Solid steel electrically welded body.
• 8mm thick door fitted with VdS class 1 double bitted safe lock & 2 keys.
• Supplied with 2 adjustable shelves.
• Suitable for rear or floor fixing – Bolts supplied.
• Dimensions external H532mm x W374mm x D230mm
Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650