Loading the content... Loading depends on your connection speed!
Specification
• Square 90mm flush ring pull handle.
• Suitable for operating a mortice latch with an 8mm spindle.
Finish
• Stainless steel.
NOTE – This product is not ligature resisting but intended
for use where protruding handles are a concern.
Specification
• Home Office and Metropolitan Police approved.
• Simple single handed operation.
• When closed the patient has no view out of the room.
• At the viewing position the staff has full view into the room.
• Simple single handed press-to-release operation to open and bottom latching.
• Vertical sliding hatch is automatically secured in the viewing and closed positions.
• Cannot be opened from inside.
• Dry-wipe board and safe sign now incorporated into hatch assembly.
• Supplied with a unique adjustable aperture liner which eliminates any potential
ligature gap around the hatch aperture.
Specification
• Unique Anti-Barricade two way Door System.
• Provides unrestricted & immediate room access in an emergency or barricade situation.
• System utilises a frame within a frame principal, allowing for a standard 44mm or 54mm
door to be mounted within a secondary high security steel inner frame.
• Reduced ligature hinges & hardware, including anti-ligature end tips.
• Outer frame dual hook bolt locking with emergency key release.
• Rebated inner frame in robust preformed steel section.
• Suitable for standard high security door locks & hardware.
• Can be used with FD30S & FD60S fire doors.
• Designed for use with the concealed Perko Powermatic door closer HC0832.
A lockable sliding hatch with integrated louvred viewing.
Specification
• Sliding aluminium plate incorporating 11.5mm laminated glass vision panel.
• Stainless steel louvres for discreet viewing with polycarbonate dust cover.
• Aluminium guides.
• Hatch mounted on a steel backplate which can be surface fixed to a cell door.
• Supplied with key.
• Self latching.
• Aperture size 330mm wide x 125mm high.
Specification
• Aluminium ligature resisting ‘infilled’ pull handle mounted on a plate.
• Infill plate prevents the introduction of ligatures.
• 25mm diameter x 225mm on 300mm x 75mm plate.
• Can be fixed with tamper resistant screws or bolted through the door for additional strength.
• Concealed fixings.
The HC0812 is ideal where the customer needs electric unlocking of deadlocks, without the worry
of handle overrides from the secure side. Fail open versions fitted to fire exit doors, linked into
fire alarm systems achieve fire safety with security.
Specification
• Standard 12v DC operation.
• Designed to suit dead bolt 10-15mm wide x 38mm height with 12-18mm throw.
• 2200lbs Strength.
Specification
• Automatic threshold (door bottom) seal with a high efficiency mechanism.
• The seal is lifted clear of the floor as soon as the door is opened by a few mil-limetres – resulting in exceptionally low door operating forces.
• Requires no power connection.
• Self-levelling.
• Tested in accordance with BS EN ISO 140-3: 1995.
• Meets smoke leakage performance requirements of BS 5588.
• Certified CF136.
• Weighted Sound Reduction Index (Rw): 37dB.
A vertical ligature resisting viewer specifically designed for varying height custody officers looking into cells.
Specification
• Home Office approved.
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 20mm thick glass.
• 300mm high x 50mm wide clear vision.
• Solid machined one piece ligature resisting steel and aluminium body.
• Gasket free to prevent ligature attachment.
• Polycarbonate dust cover to help prevent dust penetration.
• Suits door thickness 46mm – 50mm.
• Simple clamp on design fits through hole in door.
A hatch specifically designed for dirty protest cell doors. It allows food to be passed to prisoners hygienically.
Specification
• Complies with NOMS specifications.
• The hatch can only be opened when the food box is attached and locked.
• The food box can only be removed once the hatch is closed.
• Two sizes are available ‘Wide’ for new cell doors and ‘Narrow’ for fitting to existing cell doors.
• Aperture size – Wide version 430mm wide x 130mm high. Narrow version 262mm wide x 130mm high.
Specification
• Casings manufactured from solid Aluminium billet.
• 100% viewing aperture.
• Silent viewing of the occupant so there is no disturbance, unlike that of a
traditional hatch or viewer.
• Controls can be put in place to prevent viewing from non-authorised staff
or residents.
• Suitable for use in a new door and frame (secure integral wiring through
door & frame).
• Retrofit option is available for existing doors with operation from a built in
secure button and replaceable 9v battery.
• Tested to 30 minute fire resistance.
• The viewer is safe, ligature resisting and robust, designed for use in a
secure or detention environment.
• Polycarbonate on the secure side offers the required attack resistance
and prevention of damage to the glass.
• Audit trail through an access control system if required.
A robust secure stainless steel wall shelf incorporating ‘snap hooks’ which collapse under
a pre-set load to prevent ligature attachment. Suitable for use within a prison cell.
Specification
• Secured to the wall with tamper proof expansion bolts.
• Three load adjustable snap hooks supplied as standard secured to the shelf
from the rear to prevent tampering.
A vision panel specifically designed for dirty protest cell doors. It allows dirty lenses to be wiped clean to view into the cell and also provides a system to safely remove soiled lenses from the vision panel and replace with clean.
Specification
• Solid machined aluminium construction.
• Complies with NOMS specifications.
• Sliding privacy cover.
• 225mm high x 60mm wide clear vision.
Specification
• Constructed in three pieces.
• Ligature resisting radius edges and corners.
• Supplied with security fixings and wall plugs.
• 3mm back plate with four countersunk holes to secure it to the wall.
• Replaceable 1.6mm Highly polished finished mirror.
• 3mm outer frame securing mirror with tamper proof fixings.
A vertical sliding service hatch incorporating a polycarbonate viewing strip to ensure it is
safe to open the hatch fully.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
Heavy Duty Magnetic Morticed Deadlock – Single Action
To provide secure deadlocking of swinging doors or gates where a superior level of security is necessary. This lock is specifically designed for very high use applications; typically securing internal doors and main access routes.
The 3G222 magnetic lock affords a higher level of security due to the inability to sight read keys. The magnetic key code is impossible to read or duplicate using normal human senses alone or duplicate with standard workshop equipment.
Specification
• Steel deadbolt, with carbide anti-cutting rollers and 20mm throw.
• Unique magnetic locking system.
• Locking arrangement designed to provide extended product life.
• Reinforcing plates to provide added strength.
• Anti-tamper device to prevent unauthorised removal.
• Dedicated key profile operates single action magnetic locks only.
• Escutcheon designed to give positive key alignment.
• Security fixings to prevent unauthorised removal.
A heavy duty vandal resistant through the wall magnification viewer designed for viewing through walls into cells.
Specification
• Clear crisp image.
• Wide field of view.
• Glass optical lens system.
• Interchangeable unit construction.
• Fits wall thicknesses from 90mm — 200mm.
• Special lengths can be manufactured on request.
• Toughened protective window.
• Locking screws to prevent removal.
• 29mm diameter hole required.
The Medicine Cabinet is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.
Specification
• High security cabinet for the safekeeping of controlled drugs / medicines.
• 4mm Solid steel electrically welded body.
• 8mm thick door fitted with VdS class 1 double bitted safe lock & 2 keys.
• Supplied with 2 adjustable shelves.
• Suitable for rear or floor fixing – Bolts supplied.
• Dimensions external H532mm x W374mm x D230mm
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650