Loading the content... Loading depends on your connection speed!
A vertical ligature resisting viewer specifically designed for varying height custody officers looking into cells.
Specification
• Home Office approved.
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 20mm thick glass.
• 300mm high x 50mm wide clear vision.
• Solid machined one piece ligature resisting steel and aluminium body.
• Gasket free to prevent ligature attachment.
• Polycarbonate dust cover to help prevent dust penetration.
• Suits door thickness 46mm – 50mm.
• Simple clamp on design fits through hole in door.
Finish
• Anodised black and black polyester powder coated.
• Stainless steel louvres satin polished.
A lockable sliding hatch with integrated louvred viewing.
Specification
• Sliding aluminium plate incorporating 11.5mm laminated glass vision panel.
• Stainless steel louvres for discreet viewing with polycarbonate dust cover.
• Aluminium guides.
• Hatch mounted on a steel backplate which can be surface fixed to a cell door.
• Supplied with key.
• Self latching.
• Aperture size 330mm wide x 125mm high.
Specification
• Aluminium ligature resisting ‘infilled’ pull handle mounted on a plate.
• Infill plate prevents the introduction of ligatures.
• 25mm diameter x 225mm on 300mm x 75mm plate.
• Can be fixed with tamper resistant screws or bolted through the door for additional strength.
• Concealed fixings.
Specification
• Constructed from 4mm thick grade 304 perforated stainless steel sheet welded within a 3mm thick zed section stainless steel frame with the corners of the frame rounded to reduce potential for ligature attachment, the grille is designed for surface mounting directly on top of masonry, render or tiling using tamper resistant screws.
• The grilles offer a minimum of 18% free area for ventilation with the perforations to Home Office agreed dimensions to reduce ligature opportunities and restrict the passage of contraband.
• 2mm diameter holes at 4mm staggered pitch.
• Many sizes available from stock.
To provide secure locking and a high level of security where the use of a handle is not required.
Specification
• Unique 5 detainer locking mechanism with thousands of key combinations.
• Steel deadbolt with 14mm throw.
• Anti-padsaw steel rollers.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Integral mounting frame to increase strength and reduce ligature risk.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is fixed to the ceiling using tamper proof screws provided.
• Weight 4kg.
• Diameter 500mm.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 90° quarter hemisphere mirror is designed for mounting at high level, in the top far corner of the room, thus providing a full view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.
The Medicine Safe is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.
Specification
• Ideal in the office, for the safe keeping of paper documents and valuables.
• Suitable for up to £2,000 cash (10 x valuables).
• Independently tested and certified to EN 14450 51 by VdS test house.
• Double wall construction with fire resistant fill.
• Up to 30 minute protection for documents at 750 degrees.
• Heavy duty 3-way locking mechanism.
• Full height dog bar protects hinge side.
• Standard locking – CEN/VdS approved double bitted lock and 2 keys.
• Optional inner compartments and pull-out frames available.
Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.
A vertical sliding service hatch supplied as one assembly mounted on a steel backplate for
surface fixing to doors.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 90° half hemi-sphere mirror is designed for mounting at high level, at the junction of the wall and ceil-ing, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws provided.
• Weight 3kg.
• Overall size is 250mm wide x 250mm high.
Heavy Duty Magnetic Morticed Deadlock – Single Action
To provide secure deadlocking of swinging doors or gates where a superior level of security is necessary. This lock is specifically designed for very high use applications; typically securing internal doors and main access routes.
The 3G222 magnetic lock affords a higher level of security due to the inability to sight read keys. The magnetic key code is impossible to read or duplicate using normal human senses alone or duplicate with standard workshop equipment.
Specification
• Steel deadbolt, with carbide anti-cutting rollers and 20mm throw.
• Unique magnetic locking system.
• Locking arrangement designed to provide extended product life.
• Reinforcing plates to provide added strength.
• Anti-tamper device to prevent unauthorised removal.
• Dedicated key profile operates single action magnetic locks only.
• Escutcheon designed to give positive key alignment.
• Security fixings to prevent unauthorised removal.
A robust square vision panel incorporating a louvred privacy cover. Suitable for seclusion rooms or circulation doors.
Specification
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 150mm x 150mm Clear vision.
• Solid machined one piece steel and aluminium body.
• Gasket free.
• Polycarbonate dust cover to help prevent dust penetration.
• Choice of 9.5mm or 21mm thick laminated glass.
• Suits door thickness’s 44mm – 54mm.
• Simple clamp on design fits through hole in door.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650