Loading the content... Loading depends on your connection speed!
To provide secure locking and a high level of security where the use of a handle is not required.
Specification
• Unique 5 detainer locking mechanism with thousands of key combinations.
• Steel deadbolt with 14mm throw.
• Anti-padsaw steel rollers.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
Overview
Mortice deadlock with formed-up case, welded forend and flat cap screwed to pillars in the case. Deadbolt operable by key from either side (full turn to lock or unlock).
Finish
• Deadbolt – Brass.
• Body – Steel.
A vision panel specifically designed for dirty protest cell doors. It allows dirty lenses to be wiped clean to view into the cell and also provides a system to safely remove soiled lenses from the vision panel and replace with clean.
Specification
• Solid machined aluminium construction.
• Complies with NOMS specifications.
• Sliding privacy cover.
• 225mm high x 60mm wide clear vision.
Specification
• Automatic threshold (door bottom) seal with a high efficiency mechanism.
• The seal is lifted clear of the floor as soon as the door is opened by a few mil-limetres – resulting in exceptionally low door operating forces.
• Requires no power connection.
• Self-levelling.
• Tested in accordance with BS EN ISO 140-3: 1995.
• Meets smoke leakage performance requirements of BS 5588.
• Certified CF136.
• Weighted Sound Reduction Index (Rw): 37dB.
A robust secure stainless steel wall shelf incorporating ‘snap hooks’ which collapse under
a pre-set load to prevent ligature attachment. Suitable for use within a prison cell.
Specification
• Secured to the wall with tamper proof expansion bolts.
• Three load adjustable snap hooks supplied as standard secured to the shelf
from the rear to prevent tampering.
Specification
• Max door width 1250mm (HC0829A), 1400mm (HC0829B) .
• Max door weight: 100kg (HC0829A), 180kg (HC0829B) .
• ‘Thinking’ back check.
• Adjustable sweep speed.
• Adjustable latching speed.
• Adjustable closing force.
• Successful independent testing to BS EN 1154.
• CERTIFIRE Approved for fire doors: CF140 ITT60/MM/IMM240.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
The HC0813 is designed for high security applications ideal where the customer needs electric
unlocking of deadlocks, without the worry of handle overrides from the secure side. Fail open
versions fitted to fire exit doors, linked into fire alarm systems achieve fire safety with security.
Specification
• Standard 12v DC operation.
• Designed to suit dead bolt 18mm wide x 65mm height with 18-21mm throw.
• 4400lbs Strength.
Specification
• Unique Anti-Barricade two way Door System.
• Provides unrestricted & immediate room access in an emergency or barricade situation.
• System utilises a frame within a frame principal, allowing for a standard 44mm or 54mm
door to be mounted within a secondary high security steel inner frame.
• Reduced ligature hinges & hardware, including anti-ligature end tips.
• Outer frame dual hook bolt locking with emergency key release.
• Rebated inner frame in robust preformed steel section.
• Suitable for standard high security door locks & hardware.
• Can be used with FD30S & FD60S fire doors.
• Designed for use with the concealed Perko Powermatic door closer HC0832.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Integral mounting frame to increase strength and reduce ligature risk.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is fixed to the ceiling using tamper proof screws provided.
• Weight 4kg.
• Diameter 500mm.
The Medicine Safe is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.
Specification
• Ideal in the office, for the safe keeping of paper documents and valuables.
• Suitable for up to £2,000 cash (10 x valuables).
• Independently tested and certified to EN 14450 51 by VdS test house.
• Double wall construction with fire resistant fill.
• Up to 30 minute protection for documents at 750 degrees.
• Heavy duty 3-way locking mechanism.
• Full height dog bar protects hinge side.
• Standard locking – CEN/VdS approved double bitted lock and 2 keys.
• Optional inner compartments and pull-out frames available.
Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 90° quarter hemisphere mirror is designed for mounting at high level, in the top far corner of the room, thus providing a full view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650