Loading the content... Loading depends on your connection speed!
Specification
• Mirror frame 22mm thick constructed in one piece without joints or crevices from solid composite material.
• A smooth finish to all external surfaces that is hygienic, easy to clean and resistant to scale build-up and deposits.
• 3mm thick Polycarbonate mirror backed with 6mm MDF with a scratch resistant coating.
• Available in 250mm x 350mm and 500mm x 650mm.
• Intended to be secured to the wall with Gripfast or structural adhesive and pointed around the edges with anti-pick mastic.
Finish
• Standard colours are ‘White’ and ‘Thames’ (as shown).
Options
• Additional colours are available on request.
HC0873S (small)
250mm x 350mm
HC0873L (large)
500mm x 650mm
The HC0813 is designed for high security applications ideal where the customer needs electric
unlocking of deadlocks, without the worry of handle overrides from the secure side. Fail open
versions fitted to fire exit doors, linked into fire alarm systems achieve fire safety with security.
Specification
• Standard 12v DC operation.
• Designed to suit dead bolt 18mm wide x 65mm height with 18-21mm throw.
• 4400lbs Strength.
Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 90° quarter hemisphere mirror is designed for mounting at high level, in the top far corner of the room, thus providing a full view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
Specification
• Max door width: 1100mm (HC0830A), 1400mm (HC0830B).
• Max door weight: 100kg (HC0830A), 180kg (HC0830B).
• Concealed closer.
• Cam action technology.
• Slide channel arm.
• Adjustable sweep speed.
• Adjustable latching speed.
• Adjustable closing force.
• Successful independent testing to BS EN 1154.
• CERTIFIRE Approved for fire doors: CF140 ITT60/MM/IMM240.
A lockable sliding hatch with integrated louvred viewing.
Specification
• Sliding aluminium plate incorporating 11.5mm laminated glass vision panel.
• Stainless steel louvres for discreet viewing with polycarbonate dust cover.
• Aluminium guides.
• Hatch mounted on a steel backplate which can be surface fixed to a cell door.
• Supplied with key.
• Self latching.
• Aperture size 330mm wide x 125mm high.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling using tamper proof screws.
A vertical sliding service hatch incorporating a polycarbonate viewing strip to ensure it is
safe to open the hatch fully.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Integral mounting frame to increase strength and reduce ligature risk.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is fixed to the ceiling using tamper proof screws provided.
• Weight 4kg.
• Diameter 500mm.
A robust secure stainless steel wall shelf incorporating ‘snap hooks’ which collapse under
a pre-set load to prevent ligature attachment. Suitable for use within a prison cell.
Specification
• Secured to the wall with tamper proof expansion bolts.
• Three load adjustable snap hooks supplied as standard secured to the shelf
from the rear to prevent tampering.
To provide secure locking of bedroom doors with a ‘privacy’ locking facility under operation
by the occupant.
Specification
• Solid Case Technology; Lock case machined from single piece carbon steel.
• Steel main bolt, with carbide anti-cutting rollers, and 32mm throw.
• Independent 7-lever locking mechanism.
• Factory restricted key section.
• Integral baffle arrangements to resist manipulation and interference via the keyhole.
• Privacy locking via pin tumbler cylinder.
Heavy Duty Magnetic Morticed Deadlock – Single Action
To provide secure deadlocking of swinging doors or gates where a superior level of security is necessary. This lock is specifically designed for very high use applications; typically securing internal doors and main access routes.
The 3G222 magnetic lock affords a higher level of security due to the inability to sight read keys. The magnetic key code is impossible to read or duplicate using normal human senses alone or duplicate with standard workshop equipment.
Specification
• Steel deadbolt, with carbide anti-cutting rollers and 20mm throw.
• Unique magnetic locking system.
• Locking arrangement designed to provide extended product life.
• Reinforcing plates to provide added strength.
• Anti-tamper device to prevent unauthorised removal.
• Dedicated key profile operates single action magnetic locks only.
• Escutcheon designed to give positive key alignment.
• Security fixings to prevent unauthorised removal.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 180° half hemi-sphere mirror is designed for mounting at high level, at the junction of the wall and ceil-ing, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws provided.
• Weight 4.5kg.
• Overall size is 500mm wide x 250mm high x 160mm deep.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650