A robust square vision panel incorporating a louvred privacy cover. Suitable for seclusion rooms or circulation doors.

Specification
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 150mm x 150mm Clear vision.
• Solid machined one piece steel and aluminium body.
• Gasket free.
• Polycarbonate dust cover to help prevent dust penetration.
• Choice of 9.5mm or 21mm thick laminated glass.
• Suits door thickness’s 44mm – 54mm.
• Simple clamp on design fits through hole in door.

Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.

Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.

A vertical sliding service hatch incorporating a polycarbonate viewing strip to ensure it is
safe to open the hatch fully.

Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.

Specification
• Large aluminium ligature resisting unsprung lever handle set.
• The lever handles are designed to point downwards to help prevent
ligature attachment.
• Concealed fixings.

Specification
• Compatible with HC0857.
• Comes complete with fixing screws.
• 50mm Dia with a total thickness of 20mm.

Specification
• Solid rubber conical door stop mounted in a ligature resisting solid aluminium housing.
• 120mm diameter x 80mm.
• Supplied and fixed with M10 expansion bolt.
• Suitable for fixing at low or high level.

Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling using tamper proof screws.

Specification
• Strong butt hinges for lighter duty security doors.
• Trapped pin.
• HC0826A – 100mm long x 67mm open width.
• HC0826B – 100mm long x 88mm open width.

Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 360° full hemi-sphere mirror is designed for mounting on the wall, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is fixed to the wall using tamper proof screws provided.
• Weight 2.5kg.
• Overall size is 500mm diameter.

Specification
• Constructed in three pieces.
• Ligature resisting radius edges and corners.
• Supplied with security fixings and wall plugs.
• 3mm back plate with four countersunk holes to secure it to the wall.
• Replaceable 1.6mm Highly polished finished mirror.
• 3mm outer frame securing mirror with tamper proof fixings.

The Medical Storage Cabinet is suitable for storing general First Aid items.

Specification
• General First Aid equipment storage.
• 1.5mm steel cabinet with flush closing door.
• Lockable inner compartment c/w 2 keys.
• Supplied with 2 removable shelves.
• Supplied with security lock and 2 keys.
• Dimensions external H550mm x W380mm x D205mm.

Heavy Duty Magnetic Morticed Deadlock – Single Action
To provide secure deadlocking of swinging doors or gates where a superior level of security is necessary. This lock is specifically designed for very high use applications; typically securing internal doors and main access routes.
The 3G222 magnetic lock affords a higher level of security due to the inability to sight read keys. The magnetic key code is impossible to read or duplicate using normal human senses alone or duplicate with standard workshop equipment.

Specification
• Steel deadbolt, with carbide anti-cutting rollers and 20mm throw.
• Unique magnetic locking system.
• Locking arrangement designed to provide extended product life.
• Reinforcing plates to provide added strength.
• Anti-tamper device to prevent unauthorised removal.
• Dedicated key profile operates single action magnetic locks only.
• Escutcheon designed to give positive key alignment.
• Security fixings to prevent unauthorised removal.

Specification
• Solid rubber block.
• 124mm long x 44mm wide x 46mm high.
• Supplied with two 10×100/50 frame fixings.
• Suitable for fixing to a wall or floor.