Loading the content... Loading depends on your connection speed!
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
observer to the mirror PLUS the distance
from the mirror to the object being
observed.
Finish
• Polyester powder coated frame. (under 6m distance*)
Options
• Available in 450mm diameter or 600mm diameter (standard) or 900mm diameter (large).
HC0863S (small)
450mm x 225mm x 150mm (under 6m distance*)
HC0863M (medium)
600mm x 300mm x 160mm (under 9m distance*)
HC0863L (large)
900mm x 450mm x 165mm (over 9m distance*)
A robust secure stainless steel wall shelf incorporating ‘snap hooks’ which collapse under
a pre-set load to prevent ligature attachment. Suitable for use within a prison cell.
Specification
• Secured to the wall with tamper proof expansion bolts.
• Three load adjustable snap hooks supplied as standard secured to the shelf
from the rear to prevent tampering.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling using tamper proof screws.
Specification
• Aluminium ligature resisting ‘infilled’ pull handle mounted on a plate.
• Infill plate prevents the introduction of ligatures.
• 25mm diameter x 225mm on 300mm x 75mm plate.
• Can be fixed with tamper resistant screws or bolted through the door for additional strength.
• Concealed fixings.
Through the wall or surface mounted key drop off cabinet designed to be used in areas where 24 hour key drop off is required or passing keys into a secure area with the through the wall version.
Specification
• Suitable for wall thickness from 100 – 190mm as standard. (through the wall)
• Fully welded construction to meet the demands of the day to day working environment.
• Manufactured from 1.2mm thick mild steel.
• Fitted with a anti-tamper security clutch head screws to prevent removal.
• Internal combed baffle system to prevent fishing.
• HC0879A – Body – 400 x 200 x 180mm (HxWxD) Chute -45 x 120mm (HxW)
• HC0879B – Body – 400 x 200 x 180mm (HxWxD)
A robust square vision panel incorporating a louvred privacy cover. Suitable for seclusion rooms or circulation doors.
Specification
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 150mm x 150mm Clear vision.
• Solid machined one piece steel and aluminium body.
• Gasket free.
• Polycarbonate dust cover to help prevent dust penetration.
• Choice of 9.5mm or 21mm thick laminated glass.
• Suits door thickness’s 44mm – 54mm.
• Simple clamp on design fits through hole in door.
To provide secure locking of Seclusion Room doors.
Specification
• Solid Case Technology; Lock case machined from single piece carbon steel.
• Steel main bolt, with carbide anti-cutting rollers, and 32mm throw.
• Independent 7-lever locking mechanism.
• Factory restricted key section.
• Integral baffle arrangements to resist manipulation and interference via the keyhole.
Electro-Mechanical Mortice Lock
To provide secure locking of swinging passage / control doors using third party secu-rity management systems (SMS) or conventional key control. Designed to enable key and electric operation from both sides of the door. This lock is specifically designed for very high use applications; typically securing perimeter doors and main access routes.
Specification
• Solid Case Technology; Lock case machined from single piece carbon steel block.
• Steel main bolt, with carbide anti-cuffing rollers and 25mm throw.
• Supplied with “T” Handle as standard.
• Unique dual solenoid electric locking latch.
• Independent 8-lever locking mechanism.
• Lock provides status monitoring of critical functions and tamper.
• Integral baffle arrangements to resist manipulation and interference via the keyhole.
• Dedicated key profile operates 3R63 group of locks only.
Specification
• Electro-magnetic hold-open unit for fire doors when linked to a fire alarm system.
• Max door width 1100mm (HC0831A/D), 1250mm (HC0831B/E), 1400mm (HC0831C/E).
• Max door weight: 80kg (HC0831A/D), 100kg (HC0831B/E), 120kg (HC0831C/F)
• Adjustable sweep speed.
• Adjustable latching speed.
• Free swing option available.
• Successfully independently tested to BS EN 1155.
• CERTIFIRE approved for fire doors: CF117 ITT120/MM/IMM240.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 90° quarter hemisphere mirror is designed for mounting at high level, in the top far corner of the room, thus providing a full view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
Specification
• Automatic threshold (door bottom) seal with a high efficiency mechanism.
• The seal is lifted clear of the floor as soon as the door is opened by a few mil-limetres – resulting in exceptionally low door operating forces.
• Requires no power connection.
• Self-levelling.
• Tested in accordance with BS EN ISO 140-3: 1995.
• Meets smoke leakage performance requirements of BS 5588.
• Certified CF136.
• Weighted Sound Reduction Index (Rw): 37dB.
To provide secure locking, (with latching facility) of hinged wooden doors on offices and rooms where master-keying and/or, suiting with other mortice range locks is a requirement, or where a knob or lever handle action with ample space (to clear rebated frame for example) is preferred.
Specification
• Steel Body.
• Brass deadbolt with 14mm throw.
• Anti-padsaw steel rollers.
• 5 detainer mechanism with thousands of key combinations.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
• Can be suited as part of a master keyed system.
• Optional micro-switches for alarm systems integration.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 180° half hemi-sphere mirror is designed for mounting at high level, at the junction of the wall and ceil-ing, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws provided.
• Weight 4.5kg.
• Overall size is 500mm wide x 250mm high x 160mm deep.
Specification
• Casings manufactured from solid Aluminium billet.
• 100% viewing aperture.
• Silent viewing of the occupant so there is no disturbance, unlike that of a
traditional hatch or viewer.
• Controls can be put in place to prevent viewing from non-authorised staff
or residents.
• Suitable for use in a new door and frame (secure integral wiring through
door & frame).
• Retrofit option is available for existing doors with operation from a built in
secure button and replaceable 9v battery.
• Tested to 30 minute fire resistance.
• The viewer is safe, ligature resisting and robust, designed for use in a
secure or detention environment.
• Polycarbonate on the secure side offers the required attack resistance
and prevention of damage to the glass.
• Audit trail through an access control system if required.
Heavy Duty Morticed Deadlock – Single Action
To provide secure deadlocking of swinging doors or gates. This lock is specifically designed for very high use applications; typically securing internal doors and main access routes.
Specification
• Composite deadbolt, with carbide anti-cutting rollers and 19mm throw.
• 12 lever highly durable mechanism.
• Low friction key journals.
• Lever arrangement designed to provide extended product life.
• Dedicated key profile.
• Escutcheon designed to give positive key alignment.
• Security fixings to prevent unauthorised removal.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650