The Medicine Safe is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.

Specification
• Ideal in the office, for the safe keeping of paper documents and valuables.
• Suitable for up to £2,000 cash (10 x valuables).
• Independently tested and certified to EN 14450 51 by VdS test house.
• Double wall construction with fire resistant fill.
• Up to 30 minute protection for documents at 750 degrees.
• Heavy duty 3-way locking mechanism.
• Full height dog bar protects hinge side.
• Standard locking – CEN/VdS approved double bitted lock and 2 keys.
• Optional inner compartments and pull-out frames available.

Specification
• Solid rubber block.
• 150mm long x 50mm wide x 50mm high.
• Supplied with 2 x M10 expansion bolt fixings.
• Suitable for fixing to a wall or floor.

Specification
• Solid rubber block.
• 124mm long x 44mm wide x 46mm high.
• Supplied with two 10×100/50 frame fixings.
• Suitable for fixing to a wall or floor.

Specification
• Aluminium ligature resisting ‘infilled’ pull handle mounted on a plate.
• Infill plate prevents the introduction of ligatures.
• 25mm diameter x 225mm on 300mm x 75mm plate.
• Can be fixed with tamper resistant screws or bolted through the door for additional strength.
• Concealed fixings.

The 3G417 is a morticed sprung latchbolt of robust construction based on a small mortice footprint.
The latchbolt provides an overall throw of 32mm when deadlocked and 12mm when latched.

Specification
• Solid Case Technology; Lock case machined from single piece carbon steel.
• Steel main bolt, with carbide anti-cutting rollers, and 32mm overall bolt throw.
• 12mm sprung latch controlled by occupant.
• Independent 7-lever locking mechanism.
• Factory restricted key section.
• Anti-ligature knob and door furniture.
• Through fix design for handle and furniture.

Specification
• Unique Anti-Barricade two way Door System.
• Provides unrestricted & immediate room access in an emergency or barricade situation.
• System utilises a frame within a frame principal, allowing for a standard 44mm or 54mm
door to be mounted within a secondary high security steel inner frame.
• Reduced ligature hinges & hardware, including anti-ligature end tips.
• Outer frame dual hook bolt locking with emergency key release.
• Rebated inner frame in robust preformed steel section.
• Suitable for standard high security door locks & hardware.
• Can be used with FD30S & FD60S fire doors.
• Designed for use with the concealed Perko Powermatic door closer HC0832.

Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.

Specification
• Designed to be fitted to existing door stops.
• Tested in accordance with BS EN ISO 140-3: 1995.
• Meets smoke leakage performance requirements of BS 5588.
• Certified CF136.
• Weighted Sound Reduction Index (Rw): 31dB.

Specification
• Casings manufactured from solid Aluminium billet.
• 100% viewing aperture.
• Silent viewing of the occupant so there is no disturbance, unlike that of a
traditional hatch or viewer.
• Controls can be put in place to prevent viewing from non-authorised staff
or residents.
• Suitable for use in a new door and frame (secure integral wiring through
door & frame).
• Retrofit option is available for existing doors with operation from a built in
secure button and replaceable 9v battery.
• Tested to 30 minute fire resistance.
• The viewer is safe, ligature resisting and robust, designed for use in a
secure or detention environment.
• Polycarbonate on the secure side offers the required attack resistance
and prevention of damage to the glass.
• Audit trail through an access control system if required.

Specification
• Constructed in three pieces.
• Ligature resisting radius edges and corners.
• Supplied with security fixings and wall plugs.
• 3mm back plate with four countersunk holes to secure it to the wall.
• Replaceable 1.6mm Highly polished finished mirror.
• 3mm outer frame securing mirror with tamper proof fixings.

A vertical ligature resisting viewer specifically designed for varying height custody officers looking into cells.

Specification
• Home Office approved.
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 20mm thick glass.
• 300mm high x 50mm wide clear vision.
• Solid machined one piece ligature resisting steel and aluminium body.
• Gasket free to prevent ligature attachment.
• Polycarbonate dust cover to help prevent dust penetration.
• Suits door thickness 46mm – 50mm.
• Simple clamp on design fits through hole in door.

A vision panel specifically designed for dirty protest cell doors. It allows dirty lenses to be wiped clean to view into the cell and also provides a system to safely remove soiled lenses from the vision panel and replace with clean.

Specification
• Solid machined aluminium construction.
• Complies with NOMS specifications.
• Sliding privacy cover.
• 225mm high x 60mm wide clear vision.

Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling using tamper proof screws.

Specification
• Max door width: 1100mm (HC0830A), 1400mm (HC0830B).
• Max door weight: 100kg (HC0830A), 180kg (HC0830B).
• Concealed closer.
• Cam action technology.
• Slide channel arm.
• Adjustable sweep speed.
• Adjustable latching speed.
• Adjustable closing force.
• Successful independent testing to BS EN 1154.
• CERTIFIRE Approved for fire doors: CF140 ITT60/MM/IMM240.