Loading the content... Loading depends on your connection speed!
Specification
• Lead cover to enable the unbroken transfer of wire bundles up to 6mm in diameter between door and frame. Suitable for doors opening up to 1202.
• Not for use on centrally pivoted doors.
Finish
• Chrome.
To provide secure locking of bedroom doors with a ‘privacy’ locking facility under operation
by the occupant.
Specification
• Solid Case Technology; Lock case machined from single piece carbon steel.
• Steel main bolt, with carbide anti-cutting rollers, and 32mm throw.
• Independent 7-lever locking mechanism.
• Factory restricted key section.
• Integral baffle arrangements to resist manipulation and interference via the keyhole.
• Privacy locking via pin tumbler cylinder.
Specification
• Constructed in three pieces.
• Ligature resisting radius edges and corners.
• Supplied with security fixings and wall plugs.
• 3mm back plate with four countersunk holes to secure it to the wall.
• Replaceable 1.6mm Highly polished finished mirror.
• 3mm outer frame securing mirror with tamper proof fixings.
A robust square vision panel incorporating a louvred privacy cover. Suitable for seclusion rooms or circulation doors.
Specification
• Quiet, discreet louvred viewing by simply lifting the louvre handle.
• 150mm x 150mm Clear vision.
• Solid machined one piece steel and aluminium body.
• Gasket free.
• Polycarbonate dust cover to help prevent dust penetration.
• Choice of 9.5mm or 21mm thick laminated glass.
• Suits door thickness’s 44mm – 54mm.
• Simple clamp on design fits through hole in door.
The Medicine Safe is perfect for controlled drugs that are governed by the Home Office Drugs Inspectorate direction of control.
Specification
• Ideal in the office, for the safe keeping of paper documents and valuables.
• Suitable for up to £2,000 cash (10 x valuables).
• Independently tested and certified to EN 14450 51 by VdS test house.
• Double wall construction with fire resistant fill.
• Up to 30 minute protection for documents at 750 degrees.
• Heavy duty 3-way locking mechanism.
• Full height dog bar protects hinge side.
• Standard locking – CEN/VdS approved double bitted lock and 2 keys.
• Optional inner compartments and pull-out frames available.
Through the wall or surface mounted key drop off cabinet designed to be used in areas where 24 hour key drop off is required or passing keys into a secure area with the through the wall version.
Specification
• Suitable for wall thickness from 100 – 190mm as standard. (through the wall)
• Fully welded construction to meet the demands of the day to day working environment.
• Manufactured from 1.2mm thick mild steel.
• Fitted with a anti-tamper security clutch head screws to prevent removal.
• Internal combed baffle system to prevent fishing.
• HC0879A – Body – 400 x 200 x 180mm (HxWxD) Chute -45 x 120mm (HxW)
• HC0879B – Body – 400 x 200 x 180mm (HxWxD)
A vertical sliding service hatch supplied as one assembly mounted on a steel backplate for
surface fixing to doors.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
A heavy duty vandal resistant through the wall magnification viewer designed for viewing through walls into cells.
Specification
• Clear crisp image.
• Wide field of view.
• Glass optical lens system.
• Interchangeable unit construction.
• Fits wall thicknesses from 90mm — 200mm.
• Special lengths can be manufactured on request.
• Toughened protective window.
• Locking screws to prevent removal.
• 29mm diameter hole required.
Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.
A vertical sliding service hatch incorporating a polycarbonate viewing strip to ensure it is
safe to open the hatch fully.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
Specification
• Max door width 1250mm (HC0829A), 1400mm (HC0829B) .
• Max door weight: 100kg (HC0829A), 180kg (HC0829B) .
• ‘Thinking’ back check.
• Adjustable sweep speed.
• Adjustable latching speed.
• Adjustable closing force.
• Successful independent testing to BS EN 1154.
• CERTIFIRE Approved for fire doors: CF140 ITT60/MM/IMM240.
To provide secure locking, (with latching facility) of hinged wooden doors on offices and rooms where master-keying and/or, suiting with other mortice range locks is a requirement, or where a knob or lever handle action with ample space (to clear rebated frame for example) is preferred.
Specification
• Steel Body.
• Brass deadbolt with 14mm throw.
• Anti-padsaw steel rollers.
• 5 detainer mechanism with thousands of key combinations.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
• Can be suited as part of a master keyed system.
• Optional micro-switches for alarm systems integration.
Specification
• Electro-magnetic hold-open unit for fire doors when linked to a fire alarm system.
• Max door width 1100mm (HC0831A/D), 1250mm (HC0831B/E), 1400mm (HC0831C/E).
• Max door weight: 80kg (HC0831A/D), 100kg (HC0831B/E), 120kg (HC0831C/F)
• Adjustable sweep speed.
• Adjustable latching speed.
• Free swing option available.
• Successfully independently tested to BS EN 1155.
• CERTIFIRE approved for fire doors: CF117 ITT120/MM/IMM240.
A lockable sliding hatch with integrated louvred viewing.
Specification
• Sliding aluminium plate incorporating 11.5mm laminated glass vision panel.
• Stainless steel louvres for discreet viewing with polycarbonate dust cover.
• Aluminium guides.
• Hatch mounted on a steel backplate which can be surface fixed to a cell door.
• Supplied with key.
• Self latching.
• Aperture size 330mm wide x 125mm high.
Specification
• Constructed from 4mm thick grade 304 perforated stainless steel sheet welded within a 3mm thick zed section stainless steel frame with the corners of the frame rounded to reduce potential for ligature attachment, the grille is designed for surface mounting directly on top of masonry, render or tiling using tamper resistant screws.
• The grilles offer a minimum of 18% free area for ventilation with the perforations to Home Office agreed dimensions to reduce ligature opportunities and restrict the passage of contraband.
• 2mm diameter holes at 4mm staggered pitch.
• Many sizes available from stock.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650