Loading the content... Loading depends on your connection speed!
HC0732E Tactile Button
• Tactile button (needs to be pressed).
• Anti-vandal stainless steel construction.
• 50mm diameter bezel.
• 3 meter length cable.
• 1/2 BSP thread.
• Thread extensions available from 150mm to 300mm to suit wall thickness.
NOTE – A Shower control unit and solenoid will also be required. Dependant on the position this can either operate 1 or 2 showers independently. Please see HC0747 & HC0753
Specification
• Hidden wall fixing for security.
• Ligature resisting.
• Unique head design.
• Max. Operating pressure 10 bar.
• Min. Operating pressure 0.2 bar.
• Max. Inlet Temperature 65 C.
• Shower head comes to suit various wall thickness's.
• Mechanical or electrical valve operation available.
HC0732S Button Surround (optional)
• Constructed from 4mm 304 stainless steel.
• Designed to be ligature resisting with chamfered edges.
• Engraved shower text and logo.
• Fitted with an 'O' ring seal to the front and rear.
• 23mm internal diameter and 90mm external diameter.
• 1/2 BSP thread.
HC0732E Tactile Button
• Tactile button (needs to be pressed).
• Anti-vandal stainless steel construction.
• 50mm diameter bezel.
• 3 meter length cable.
• 1/2 BSP thread.
• Thread extensions available from 150mm to 300mm to suit wall thickness.
NOTE – A Shower control unit and solenoid will also be required. Dependant on the position this can either operate 1 or 2 showers independently. Please see HC0747 & HC0753
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• The SESI is a non polluting electrolytic physical water conditioning process that protects a pipe system from the formation of limescale encrustation and rust deposits (in the case of steel pipes) without the use of chemicals, salt and the need for any electrical power supply.
• WRAS Approved (0706038).
• Designed to last 10 years and no electricity needed.
• Available in 15mm (HC0749A) or 22mm (HC0749B) compression versions.
• Length 195mm (HC07490A) or 190mm (HC0749B).
• Diameter 35mm.
• Weight 0.35kg (HC0749A) / 0.40kg (HC0749B).
Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.
• Integrated recessed soap dish.
• All edges of the faceplate are chamfered to avoid ligature attachment.
NOTE – This product requires temperature controlled water supply (HC0744).
HC0731E requires an electronic control unit (HC0754C or HC0754D).
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Temperature Adjustment Range 30 C to 50 C.
• Temperature Stability +2 C.
• Maximum Inlet Temperature 85 C.
• Maximum Working Pressure 10 Bar : Static.
• Minimum Working Pressure 0.2 Bar : Dynamic.
• Inlet Temperature Range 52 C -65 C : Hot Supply.
• 05 C – 20 C : Cold Supply.
• Highly Resistant to Scaling.
Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0727E is Provided with an electrical button plus a solenoid valve.
• HC0727M is Provided with an mechanical timed flow push button valve.
NOTE – This product requires temperature controlled water supply (HC0745).
HC0727E requires an electronic control unit (HC0755B or HC0755D).
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• 2 Channel Tap control box.
• Adjustable run time from 6 to 20 seconds.
• Built in purge control to avoid stagmentation.
• Lockout facility to help prevent flooding.
• Works with electrically operated stainless steel recessed hand rinses and washbasins.
• Lockout facility.
• HC0752A (Tactile Button), HC0752B (Wave On Button), HC0752C (Piezo) compatible, HC0748 (Solenoid Valve) compatible.
NOTE – Requires electrically operated button (HC0752) and solenoid tp complete (HC0748).
Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head X2.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0728E is Provided with an electrical button x2 plus a solenoid valve.
• HC0728M is Provided with an mechanical timed flow push button valve x2.
NOTE – This product requires temperature controlled water supply (HC0745).
HC0728E requires an electronic control unit (HC0755B or HC0755D).
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650