Loading the content... Loading depends on your connection speed!
For all enquires please call: +44 (0)1204 669 690 or email: [email protected]
Stainless Steel Urinal Divider
Product Code: HC0718
Specification
• Constructed from 50mm diameter grade 304 stainless steel welded tube with a 3mm grade 304 stainless steel welded inset panel.
• Ligature resisting unique design.
• Secured to the wall via 6 x M8 stainless countersunk fixings which are included.
Description
Product Description
Finish
• 304 stainless steel.
• Also available in grade 316 stainless steel to order.
More From: Sanitaryware.
Specification
• Designed for high-security applications.
• Virtually Indestructible.
• High impact resistance.
• High chemical resistance.
• Secure wall mount fixings (included).
• Hygienic nonporous surface.
Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.
• Integrated recessed soap dish.
• All edges of the faceplate are chamfered to avoid ligature attachment.
NOTE – This product requires temperature controlled water supply (HC0744).
HC0731E requires an electronic control unit (HC0754C or HC0754D).
Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head X2.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0728E is Provided with an electrical button x2 plus a solenoid valve.
• HC0728M is Provided with an mechanical timed flow push button valve x2.
NOTE – This product requires temperature controlled water supply (HC0745).
HC0728E requires an electronic control unit (HC0755B or HC0755D).
Specification
• 1 1/4″ 90 Elbow for use with wall mounted basins where the trap is located within the service duct.
• Seals Included.
Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel with access panel secured with security fixings.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• Functions for a period of time and then closes automatically.
• Non concussive operation.
• Variable time flow.
• Max. Operating pressure 10 bar.
• Min. Operating pressure 0.5 bar.
• Max. Inlet Temperature 65 C.
• Timed flow (Standard) 15 seconds at 1 Bar.
• 1/2″ BSP thread.
