(Pictured with taps for illustration purposes only)

Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.

Specification
• Restricts the flow, saving water, sewage and energy costs.
• Can also be used as an isolating valve.
• Blockages, albeit unlikely, can be cleared by just reversing the valve.
• Fitting quick and simple.

Specification
• 1 channel bath control box.
• Adjustable half fill & full fill levels.
• Operates a single valve post thermostatic mixer.
• Built in purge control to avoid stagmentation.
• Lockout facility.

Specification
• Ideal for use with Cell Security vertical outlet and squatting pans.
• 4 inch diameter with a 50mm water seal.
• Available in two types – P and S trap.

Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.

Specification
• Constructed from 50mm diameter grade 304 stainless steel welded tube with a 3mm grade 304 stainless steel welded inset panel.
• Ligature resisting unique design.
• Secured to the wall via 6 x M8 stainless countersunk fixings which are included.

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.

HC0705A
x1 Washroom control system

HC0705B
x1 TMV3 Thermostatic mixing valve

HC0705C
x2 Solenoid valves

HC0705D
x1 High security backplate

HC0705E
x1 High security basin

More Options Below

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.

HC0711R – Corner Pan Right (as shown)
HC0711L – Corner Pan Left

Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0727E is Provided with an electrical button plus a solenoid valve.
• HC0727M is Provided with an mechanical timed flow push button valve.

NOTE – This product requires temperature controlled water supply (HC0745).
HC0727E requires an electronic control unit (HC0755B or HC0755D).

Specification
• Offers complete washroom control.
• 1 x Flush controller built in (1 to 6 seconds programmable).
• 2 x Tap controller built in (10 to 19 seconds programmable).
• 1 x Shower controller built in (60 to 180 seconds programmable).
• Ideal for use with the Cell Security electronic stainless steel sanitary ware range.
• Built in purge control to avoid stagmentation on each channel.
• Lockout facility on each channel.

Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.

– Tactile Button
Specification
• Tactile button.
• Anti-vandal.
• 50mm diameter bezel.
• 3 meter length cable.
• 52mm 1/2 BSP thread.
• Thread extension available see HC0753.