Specification
• Constructed from 50mm diameter grade 304 stainless steel welded tube with a 3mm grade 304 stainless steel welded inset panel.
• Ligature resisting unique design.
• Secured to the wall via 6 x M8 stainless countersunk fixings which are included.

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.

HC0711R – Corner Pan Right (as shown)
HC0711L – Corner Pan Left

(Pictured with taps for illustration purposes only)

Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.

Specification
• 2 Channel Tap control box.
• Adjustable run time from 6 to 20 seconds.
• Built in purge control to avoid stagmentation.
• Lockout facility to help prevent flooding.
• Works with electrically operated stainless steel recessed hand rinses and washbasins.
• Lockout facility.
• HC0752A (Tactile Button), HC0752B (Wave On Button), HC0752C (Piezo) compatible, HC0748 (Solenoid Valve) compatible.

NOTE – Requires electrically operated button (HC0752) and solenoid tp complete (HC0748).

Specification
• Temperature Adjustment Range 30 C to 50 C.
• Temperature Stability +2 C.
• Maximum Inlet Temperature 85 C.
• Maximum Working Pressure 10 Bar : Static.
• Minimum Working Pressure 0.2 Bar : Dynamic.
• Inlet Temperature Range 52 C -65 C : Hot Supply.
• 05 C – 20 C : Cold Supply.
• Highly Resistant to Scaling.

Specification
• Offers complete washroom control.
• 1 x Flush controller built in (1 to 6 seconds programmable).
• 2 x Tap controller built in (10 to 19 seconds programmable).
• 1 x Shower controller built in (60 to 180 seconds programmable).
• Ideal for use with the Cell Security electronic stainless steel sanitary ware range.
• Built in purge control to avoid stagmentation on each channel.
• Lockout facility on each channel.

Specification
• Ideal for use with Cell Security vertical outlet and squatting pans.
• 4 inch diameter with a 50mm water seal.
• Available in two types – P and S trap.

Specification
• Easy to grip handle operated by either hand or wrist.
• Ideal for those with limited dexterity.
• 1/4 Turn catridge.
• Max. Operating pressure 10 bar.
• Min. Operating pressure 0.2 bar.
• Max. Inlet Temperature 85 C.
• 1/2″ BSP thread.

Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.

Specification
• WRAS approved.
• Available pneumatic or electrically operated.
• Supplied with wall mounting bracket.
• Removable lid.
• HC0750A – Single flush pneumatic concealed cistern supplied with 2440mm air pipe.
• HC0750B – Single flush electrical concealed cistern includes HC0754.

Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.

NOTE – This product requires temperature controlled water supply (HC0744).
HC0730E requires an electronic control unit (HC0754C or HC0754D).

Specification
• 2 Channel shower control box.
• Adjustable run time from 30 to 180 seconds.
• Built in purge control to avoid stagmentation.
• Ideal to work with our electrically operated showers.
• Lockout facility.

(Pictured with taps for illustration purposes only)

Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.

Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.