Loading the content... Loading depends on your connection speed!
Specification
• 1 1/4″ 90 Elbow for use with wall mounted basins where the trap is located within the service duct.
• Seals Included.
Finish
• High density polyethylene body.
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Hidden wall fixing for security.
• Ligature resisting.
• Unique head design.
• Max. Operating pressure 10 bar.
• Min. Operating pressure 0.2 bar.
• Max. Inlet Temperature 65 C.
• Shower head comes to suit various wall thickness's.
• Mechanical or electrical valve operation available.
HC0732E Tactile Button
• Tactile button (needs to be pressed).
• Anti-vandal stainless steel construction.
• 50mm diameter bezel.
• 3 meter length cable.
• 1/2 BSP thread.
• Thread extensions available from 150mm to 300mm to suit wall thickness.
NOTE – A Shower control unit and solenoid will also be required. Dependant on the position this can either operate 1 or 2 showers independently. Please see HC0747 & HC0753
Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.
NOTE – This product requires temperature controlled water supply (HC0744).
HC0730E requires an electronic control unit (HC0754C or HC0754D).
Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.
• Integrated recessed soap dish.
• All edges of the faceplate are chamfered to avoid ligature attachment.
NOTE – This product requires temperature controlled water supply (HC0744).
HC0731E requires an electronic control unit (HC0754C or HC0754D).
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Self draining and an ergonomically designed contoured seat.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable cistern top with tamper and proof fixings.
• Removable side panel to allow for easy outlet access
• Supplied with four M12 x 330mm long fixing bolts.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• 2 Channel Tap control box.
• Adjustable run time from 6 to 20 seconds.
• Built in purge control to avoid stagmentation.
• Lockout facility to help prevent flooding.
• Works with electrically operated stainless steel recessed hand rinses and washbasins.
• Lockout facility.
• HC0752A (Tactile Button), HC0752B (Wave On Button), HC0752C (Piezo) compatible, HC0748 (Solenoid Valve) compatible.
NOTE – Requires electrically operated button (HC0752) and solenoid tp complete (HC0748).
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650