Loading the content... Loading depends on your connection speed!
Specification
• Pneumatic push button to suit concealed cistern HC0750.
• Ligature resisting.
• Anti-vandal.
• 60mm diameter button housing.
• Two sizes available to suit different encloser thickness HC0751A 30mm MAX or HC0751B.
Finish
• Stainless steel button.
HC0757A – Rotary Captive Waste
Specification
• 1 1/4″ basin waste.
• Captive rotary plug.
• Unslotted body with metal backnut.
• 61mm flange.
• Rubber seal included.
HC0757B – Ligature-Resisting Security Waste
Specification
• Manufacture from grade 304 stainless steel.
• 1 1/4 ” BSP standard basin thread.
• Un-slotted for external overflow as standard.
• Ligature resisting 3mm dia drainage holes.
(note a plug cannot be used with this waste).
• Rubber seal & back nut included.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Self draining and an ergonomically designed contoured seat.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable cistern top with tamper and proof fixings.
• Removable side panel to allow for easy outlet access
• Supplied with four M12 x 330mm long fixing bolts.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel with access panel secured with security fixings.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Constructed in one piece without joints or crevices from grade 304 stainless steel.
• Can be used either with a top or rear water inlet (blanking plug supplied).
• Shaped bowl and anti-vandal spreader assembly ensures an efficient spread of flushing water over the internal surface.
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• The SESI is a non polluting electrolytic physical water conditioning process that protects a pipe system from the formation of limescale encrustation and rust deposits (in the case of steel pipes) without the use of chemicals, salt and the need for any electrical power supply.
• WRAS Approved (0706038).
• Designed to last 10 years and no electricity needed.
• Available in 15mm (HC0749A) or 22mm (HC0749B) compression versions.
• Length 195mm (HC07490A) or 190mm (HC0749B).
• Diameter 35mm.
• Weight 0.35kg (HC0749A) / 0.40kg (HC0749B).
Specification
• Temperature Adjustment Range 30 C to 50 C.
• Temperature Stability +2 C.
• Maximum Inlet Temperature 85 C.
• Maximum Working Pressure 10 Bar : Static.
• Minimum Working Pressure 0.2 Bar : Dynamic.
• Inlet Temperature Range 52 C -65 C : Hot Supply.
• 05 C – 20 C : Cold Supply.
• Highly Resistant to Scaling.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head X2.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0728E is Provided with an electrical button x2 plus a solenoid valve.
• HC0728M is Provided with an mechanical timed flow push button valve x2.
NOTE – This product requires temperature controlled water supply (HC0745).
HC0728E requires an electronic control unit (HC0755B or HC0755D).
Specification
• Offers complete washroom control.
• 1 x Flush controller built in (1 to 6 seconds programmable).
• 2 x Tap controller built in (10 to 19 seconds programmable).
• 1 x Shower controller built in (60 to 180 seconds programmable).
• Ideal for use with the Cell Security electronic stainless steel sanitary ware range.
• Built in purge control to avoid stagmentation on each channel.
• Lockout facility on each channel.
Specification
• Replacement electric syphon to fit HC0750 Pneumatic concealed cistern.
• Electronically operate delivering a measured volume of water upon activation.
• Typical 30% savings on water costs.
• Adjustable for optimum flush.
• Ideal for disabled or elderly.
• Easy to install and maintain.
• Vandal Proof.
• Built in overflow.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650