Specification
• 1 Channel flush control box.
• Adjustable timer between 1 and 6 seconds ( 1 second = 1 litre water approx. )
• Built in purge control to avoid stagmentation.
• 35 second delay between operation.
• Ideal to work with the electrical syphon flush conversion CSL0985.
• Lockout facility.
• HC0751A (Tactile Button), HC0751B (Wave On Button), HC0751C (Piezo) compatible.

NOTE – Requires electrically operated button (HC0751).

HC0707A
x1 Washroom control system

HC0707B
x1 TMV3 Thermostatic mixing valve

HC0707C
x2 Solenoid valves

HC0707D
x1 High security backplate

HC0707E
x1 High security basin
More options below

Specification
• Ideal for use with Cell Security vertical outlet and squatting pans.
• 4 inch diameter with a 50mm water seal.
• Available in two types – P and S trap.

Specification
• 2 Channel Tap control box.
• Adjustable run time from 6 to 20 seconds.
• Built in purge control to avoid stagmentation.
• Lockout facility to help prevent flooding.
• Works with electrically operated stainless steel recessed hand rinses and washbasins.
• Lockout facility.
• HC0752A (Tactile Button), HC0752B (Wave On Button), HC0752C (Piezo) compatible, HC0748 (Solenoid Valve) compatible.

NOTE – Requires electrically operated button (HC0752) and solenoid tp complete (HC0748).

Specification
• Pneumatic push button to suit concealed cistern HC0750.
• Ligature resisting.
• Anti-vandal.
• 60mm diameter button housing.
• Two sizes available to suit different encloser thickness HC0751A 30mm MAX or HC0751B.

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Self draining and an ergonomically designed contoured seat.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable cistern top with tamper and proof fixings.
• Removable side panel to allow for easy outlet access
• Supplied with four M12 x 330mm long fixing bolts.

(Pictured with taps for illustration purposes only)

Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.

Specification
• 1 channel bath control box.
• Adjustable half fill & full fill levels.
• Operates a single valve post thermostatic mixer.
• Built in purge control to avoid stagmentation.
• Lockout facility.

Specification
• Isolation Valve Compression Fitting – 15mm.
• 12v Powered.
• For use with Cell Security electrically operated control units.
• Compatibility: For use with 15mm pipework .
• Usage: Suitable for hot and cold water.

Specification
• Manufactured from one piece stainless steel.
• Ideal for use with Cell Security Washbasins where only one tap is required.
• Included rubber seal and backing nut.

Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Removable side panel to allow for easy outlet access.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.

Specification
• Offers complete washroom control.
• 1 x Flush controller built in (1 to 6 seconds programmable).
• 2 x Tap controller built in (10 to 19 seconds programmable).
• 1 x Shower controller built in (60 to 180 seconds programmable).
• Ideal for use with the Cell Security electronic stainless steel sanitary ware range.
• Built in purge control to avoid stagmentation on each channel.
• Lockout facility on each channel.

HC0757A – Rotary Captive Waste
Specification
• 1 1/4″ basin waste.
• Captive rotary plug.
• Unslotted body with metal backnut.
• 61mm flange.
• Rubber seal included.


HC0757B – Ligature-Resisting Security Waste
Specification
• Manufacture from grade 304 stainless steel.
• 1 1/4 ” BSP standard basin thread.
• Un-slotted for external overflow as standard.
• Ligature resisting 3mm dia drainage holes.
(note a plug cannot be used with this waste).
• Rubber seal & back nut included.

Specification
• The SESI is a non polluting electrolytic physical water conditioning process that protects a pipe system from the formation of limescale encrustation and rust deposits (in the case of steel pipes) without the use of chemicals, salt and the need for any electrical power supply.
• WRAS Approved (0706038).
• Designed to last 10 years and no electricity needed.
• Available in 15mm (HC0749A) or 22mm (HC0749B) compression versions.
• Length 195mm (HC07490A) or 190mm (HC0749B).
• Diameter 35mm.
• Weight 0.35kg (HC0749A) / 0.40kg (HC0749B).