Loading the content... Loading depends on your connection speed!
For all enquires please call: +44 (0)1204 669 690 or email: [email protected]
Wall Mounted Electronic Cigarette Lighters
Product Code: HC0919
Specification (Blue)
• Low voltage.
• Robust stainless steel construction.
• Timed control function use to prevent deliberate misuse.
• 7 second heating cycle/ 5 second shut down.
• Can be used indoors or outside.
• Anti-vandal/ligature resisting design.
• Tamperproof security screws.
• IP65 rated.
Description
Product Description
There is always a concern about naked flames and the availability of flammable liquids in
secure facilities. These units are intended to be placed in supervised areas which confine
smokers to a certain area and enable them to be monitored. As well as the reduction in
potential threat our flameless lighters can help improve efficiency and morale in the facility
because staff spend much less time overseeing or monitoring patients when they are having
a cigarette.
Finish
• Satin stainless steel.
Options
• Surface mounted.
• Recessed.
More From: Technology.
Cellsense a fully portable cell / mobile phone detection system. Ability to detect phones even if
they are turned off. A completely passive safe system which does not affect pacemakers, medical
implants and pregnancy etc. Very easy to setup and operate.
Cellsense scans large numbers of patients (> 40 inmates/minute) quickly without contact or intrusion,
saving time for correctional officers.
Specification
• Ability to setup in less than one minute.
• Indoor and outdoor use. Optional weather cover for heavy rain.
• 16 hours usage from a single charge. (3 hours recharge time)
• Can still be operated whilst being charged.
• Allows the rapid and easy scanning of large number of inmates.
• Adjustable sensitivity.
• Wall mountable.
• Comes complete with a heavy duty case.
Specification
• Complete FM remote control system.
• Supports up to 3 separate channels.
• High security protocol.
• ‘Easy Learn’ feature.
• Up to 7 transmitters per system.
• FCC / CE Compliant.
• Range up to 100 metres.
• EMC Compliant for Europe.
Specification
• Designed using state of the art technology.
• Can be used stand alone or with the Genesys suite frontend software (HC0901).
• Supports upto 96 devices per control unit, can be linked to expand further if required.
• Controls bedroom call (with voice), affray strips, panic buttons, door control, barriers, etc.
• Allows direct link between bedroom and external telephone exchange (expansion cards required).
• All events are time stamped for full traceability.
• Uses a simple 4 wire connection to communicate with it’s devices (call button, affray strip, etc).
VoIP network card enables connection between remote exchange for buildings and remote sites
via LAN and WAN (Ethernet) or via single or multi fibre infrastructure. When using copper over
100 mtrs between exchanges, 10Base-TX/100Base-TX Ethernet extenders will be required (for
upto 2KM).
Specification
• 2 voice over IP audio channels per card.
• Simple plug an play technology using the U3000 tools programme to set up IP addresses.
• Full status indicators via LED(s).
Telephone interface card enables the 3000 exchanges to be connected to a PBX exchange. This
allows public network calls to be transferred to intercoms and feature phone handsets (requires
1 channel allocated for each PBX line required).
Specification
• Gives the ability for external callers to be connect directly into the patient call system.
• Simple plug an play technology using the U3000 tools programme.
Genesys v2 is a fully integrated security management system capable of integrating multiple systems. Inter operability is enabled from one holistic platform. Genesys v2 encompasses high levels of functionality, excep-tional ease of use, graceful redundancy and advanced alarm handling. “We listened to our clients. Ease of use” was their fundamental requirement.
So we combined our 20 years' plus experience and expertise with an unquenchable thirst to understand at a granular level what today's users need. We embarked on an evangeli-cal study of how different control rooms function and what the operators are required to do, on a second by second basis. And the result? With Genesys v2 we have developed a system that is truly ground breaking and genuinely unique.
Genesys v2 is a system that the user can readily and easily use. It utilises the latest Microsoft .NET platform and Windows Presentation Foundation (WPF) for an enhanced graphical user experience and it's all wrapped up in our pioneering patented migrating 3+TM redundancy.”
HC0904
Specification
• Constructed from a tough UPVC with LCD display.
• Hands free and conventional handset for audio communication.
• Choice of simplex (push to talk, release to listen) duplex facility or hands free.
• Calls from bedrooms / external can be put on hold or transferred.
• Auxiliary lock / gate/ barrier button.
• 32 character LCD Display.
• Counts as a single device.
Specification
• Compact affray strip control unit 2 gang mounting plate.
• Contains 2 inputs and 2 outputs
• Separate reset switch available or press and hold the affray strip for reset.
• Supply voltage 10 – 12v DC
• Fuse rating 5 Amp
• Flash rate 500ms
• Relay output max switching voltage current 5 amp.
