Loading the content... Loading depends on your connection speed!
For all enquires please call: +44 (0)1204 669 690 or email: [email protected]
Metal Control Panel
Product Code: HC0903
Specification
• Constructed in BS316 marine grade stainless steel.
• Two way communication.
• Calls from bedrooms / external can be put on hold or transferred.
• Ability to accept / reset calls, Auxiliary lock/gate/barrier button.
• 40 Character 4 line text display.
• Connection to main control unit by a simple 4 wire connection.
• Multiple control panels can be used from the same main control box.
• 450mm high x 214mm wide x 65mm deep.
• Counts as a single device.
Description
Product Description
Designed to a very high standard for durability in harsh environments and for ease of use. This
can be used in all areas, such as corridors. Integrated microphone and speaker allows for direct
communication between other control panels / control handsets / bedroom call panels or even
an external telephone (telephone interface card required for external communication).
Options
• Wall or desk mountable.
More From: Technology.
Specification
• Constructed in BS316 marine grade stainless steel.
• Panels include galvanised back box.
• Highly visible impact resistant call indicator light.
• Full traceability if used with the dallas keyfob reset contact.
• Counts as a single device when used with Patient Call Panel (HC0905).
HC0917
CCTV Corner housing is ideal for mounting within high risk bedroom & other high risk areas. Designed
with easy access in mind once anti-pick mastic has been applied.
Specification
• Ligature resisting corner housing.
• Angled design for maximum room coverage.
• 4mm high impact polycarbonate with anti-scratch coating.
• Housing secured via anti-tamper fixings.
HC0905
Specification
• Constructed in BS316 marine grade stainless steel.
• Panels include galvanised back box.
• Includes built in microphone and speaker for voice communication.
• 2mm holes to comply with Home Office Standards.
• Ligature resisting housing.
• Counts as a single device when used with Call Reset Panel HC0906).
VoIP network card enables connection between remote exchange for buildings and remote sites
via LAN and WAN (Ethernet) or via single or multi fibre infrastructure. When using copper over
100 mtrs between exchanges, 10Base-TX/100Base-TX Ethernet extenders will be required (for
upto 2KM).
Specification
• 2 voice over IP audio channels per card.
• Simple plug an play technology using the U3000 tools programme to set up IP addresses.
• Full status indicators via LED(s).
These cards are required for all systems and each card plugs into the main CPU rack. They enable
up to 16 Instruments to be used (handsets, telephones, call buttons etc).
Specification
• 16 way encoder card including termination card and ribbon cable.
• Electronic isolating inputs.
• Status indicators.
HC0912
A continuous switch / alarm manufactured in a low profile minimise unintentional activations whilst
the large target area ensure ease of activation in event of an emergency.
Specification
• Ease of activation – target area 60% of the exposed face of switch.
• Tamper Proof installation – built in security features to ensure integrity of the switch.
• Wide operating temperature range 4 to 40 degrees centigrade.
• Colour Options Red, Green & Blue supplied as standard.
• Inherent shape retention – reinforces operational properties of switch.
• Illumination option – provides feedback on operational status to Staff.
• Quick & easy to install – Cut on site to suit requirements.
• Pre-wired fittings.
• Self aligning components.
• Range of ABS fittings.
• Easy to integrate in to propriety systems.
• IP65 rated.
The MIO Card enables the 3000 range of exchanges to collect inputs for personnel and general
alarms including the control of doors, barriers, motorised gates and outputs to control and monitor
auxiliary systems, specifically when the exchange is connected to the Genesys Frontend. (HC0901).
Specification
• Digital input and output.
• 8 Balanced inputs for high security installations.
• 2 x reed relays outputs (max 100ma load) and 2 x 5 amp voltage free relays.
Telephone interface card enables the 3000 exchanges to be connected to a PBX exchange. This
allows public network calls to be transferred to intercoms and feature phone handsets (requires
1 channel allocated for each PBX line required).
Specification
• Gives the ability for external callers to be connect directly into the patient call system.
• Simple plug an play technology using the U3000 tools programme.
