Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.

Specification
• Strong butt hinges for lighter duty security doors.
• Trapped pin.
• HC0826A – 100mm long x 67mm open width.
• HC0826B – 100mm long x 88mm open width.

Specification
• Unique Anti-Barricade two way Door System.
• Provides unrestricted & immediate room access in an emergency or barricade situation.
• System utilises a frame within a frame principal, allowing for a standard 44mm or 54mm
door to be mounted within a secondary high security steel inner frame.
• Reduced ligature hinges & hardware, including anti-ligature end tips.
• Outer frame dual hook bolt locking with emergency key release.
• Rebated inner frame in robust preformed steel section.
• Suitable for standard high security door locks & hardware.
• Can be used with FD30S & FD60S fire doors.
• Designed for use with the concealed Perko Powermatic door closer HC0832.

Specification
• Max door width 1250mm (HC0829A), 1400mm (HC0829B) .
• Max door weight: 100kg (HC0829A), 180kg (HC0829B) .
• ‘Thinking’ back check.
• Adjustable sweep speed.
• Adjustable latching speed.
• Adjustable closing force.
• Successful independent testing to BS EN 1154.
• CERTIFIRE Approved for fire doors: CF140 ITT60/MM/IMM240.

Specification
• Electro-magnetic hold-open unit for fire doors when linked to a fire alarm system.
• Max door width 1100mm (HC0831A/D), 1250mm (HC0831B/E), 1400mm (HC0831C/E).
• Max door weight: 80kg (HC0831A/D), 100kg (HC0831B/E), 120kg (HC0831C/F)
• Adjustable sweep speed.
• Adjustable latching speed.
• Free swing option available.
• Successfully independently tested to BS EN 1155.
• CERTIFIRE approved for fire doors: CF117 ITT120/MM/IMM240.

Specification
• For light to medium weight internal doors.
• Door thickness 40-44mm.
• Maximum door width normally 950mm.
• Maximum door height normally 2100mm.
• Maximum panel weight 80kg.
• Unhanded, distance between centres of the fixing plates must not exceed 52 mm in
order to allow door to open through 105°.
• Unit is concealed within door and frame; only the stainless steel rods and face plates
are exposed, when door is open.
• The sealed hydraulic unit closes the door at a controlled speed with adjustable latch/
stop action.
• Type-tested to BS EN 1154:1997 power size 3 tested for 1 hour fire doors to BS EN 1634.
• Designed and tested to 500,000 closing cycles.

Specification
• Solid rubber conical door stop.
• 65mm diameter x 75mm.
• Supplied and fixed with M8 expansion bolt.
• Suitable for fixing to a wall or floor.

Specification
• Solid rubber block.
• 124mm long x 44mm wide x 46mm high.
• Supplied with two 10×100/50 frame fixings.
• Suitable for fixing to a wall or floor.