Loading the content... Loading depends on your connection speed!
Specification
• Constructed in one piece highly damage resistant solid surface material.
• Anti-ligature design including grille & waste trap.
• Assists in normalising the environment.
• Non-flammable BS476 Part 6 & 7 Class “0” & “1” rated material.
Finish
• Available in a variety of colours.
Specification
• The SESI is a non polluting electrolytic physical water conditioning process that protects a pipe system from the formation of limescale encrustation and rust deposits (in the case of steel pipes) without the use of chemicals, salt and the need for any electrical power supply.
• WRAS Approved (0706038).
• Designed to last 10 years and no electricity needed.
• Available in 15mm (HC0749A) or 22mm (HC0749B) compression versions.
• Length 195mm (HC07490A) or 190mm (HC0749B).
• Diameter 35mm.
• Weight 0.35kg (HC0749A) / 0.40kg (HC0749B).
Specification
• 2 Channel Tap control box.
• Adjustable run time from 6 to 20 seconds.
• Built in purge control to avoid stagmentation.
• Lockout facility to help prevent flooding.
• Works with electrically operated stainless steel recessed hand rinses and washbasins.
• Lockout facility.
• HC0752A (Tactile Button), HC0752B (Wave On Button), HC0752C (Piezo) compatible, HC0748 (Solenoid Valve) compatible.
NOTE – Requires electrically operated button (HC0752) and solenoid tp complete (HC0748).
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with concealed floor fixing plate and four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
HC0711R – Corner Pan Right (as shown)
HC0711L – Corner Pan Left
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Constructed in one piece from 2mm grade 304 Stainless Steel.
• Ligature resisting vandal proof spray head.
• Exposed surfaces polished to a satin finish.
• Supplied with either a 30 second time flow mechanical valve button or a electrical button and solenoid valve to be used in conjunction with a shower control unit HC0754C/D.
NOTE – This product requires temperature controlled water supply (HC0744).
HC0730E requires an electronic control unit (HC0754C or HC0754D).
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Constructed in one piece without joints or crevices from grade 304 stainless steel.
• Can be used either with a top or rear water inlet (blanking plug supplied).
• Shaped bowl and anti-vandal spreader assembly ensures an efficient spread of flushing water over the internal surface.
Specification
• Hidden wall fixing for security.
• Ligature resisting.
• Unique head design.
• Max. Operating pressure 10 bar.
• Min. Operating pressure 0.2 bar.
• Max. Inlet Temperature 65 C.
• Shower head comes to suit various wall thickness's.
• Mechanical or electrical valve operation available.
HC0757A – Rotary Captive Waste
Specification
• 1 1/4″ basin waste.
• Captive rotary plug.
• Unslotted body with metal backnut.
• 61mm flange.
• Rubber seal included.
HC0757B – Ligature-Resisting Security Waste
Specification
• Manufacture from grade 304 stainless steel.
• 1 1/4 ” BSP standard basin thread.
• Un-slotted for external overflow as standard.
• Ligature resisting 3mm dia drainage holes.
(note a plug cannot be used with this waste).
• Rubber seal & back nut included.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650