Specification
• Constructed from robust 25mm thick vinyl wrapped MDF.
• Weighted to prevent unauthorised lifting.
• No visible fixings.
• Contrasting table top.

Specification
• Constructed from robust 25mm thick vinyl wrapped composite board with 2mm
PVC bonded edges bolted to the wall.
• Lockable 4mm thick polycarbonate hinged cover.
• No visible fixings.
• Can be scribed to existing wall and floor surfaces and sealed with anti-pick mastic.

Specification
• Constructed from robust 25mm thick vinyl wrapped composite board with 2mm PVC
bonded edges bolted to the wall.
• No visible fixings.
• Can be scribed to existing wall and floor surfaces and sealed with anti-pick mastic.

Specification
• Constructed from robust 25mm thick vinyl wrapped composite board with 2mm PVC
bonded edges bolted to the wall.
• Lockable 25mm thick hinged doorsrs.
• No visible fixings.
• Can be scribed to existing wall and floor surfaces and sealed with anti-pick mastic.

A unique two part Epoxy sealant which cures to form a hard wearing seal, designed to accommo-date small amounts of movement in extension but considerable movement in compression.

Specification
• 1.2 Litre Set, with separate tins for Base and Curing Agent.
• Joint width Minimum 6mm, Maximum 20mm (single application).
• Typical Shore D Hardness.
• (cured at 202 C): 60— 70.
• Work Life (Typical at 202 C): 45 minutes.
• Application Temperature: +102 C to + 402 C.
• Service Temperature: -202 C to +902 C.
• Cure Rate (at 202 C): 48 hours. At lower temperatures cure rate will be extended.
• Service Life: 20 years.

Purpose Application kit for HC1101.

Specification
• Metal Paddle for mixing.
• 5 x 310m1 empty tubes with nozzles.
• Cartridge gun applicator (may differ to the one pictured).

Purpose Application kit for HC01103.

Specification
• Each kit includes an Manual Applicator Gun, a Pack of 12 Nozzles and a Plunger.
• The Applicator gun is self contained metering, mixing and dispensing machine that simul-taneously. meters and mixes two-part adhesives as the material is applied.

A unique self mixing two part epoxy anti pick mastic developed specifically for grouting and sealing around sanitary ware and fixings in custodial premises. Approved for use in HM Prisons by the Minis-try of Justice.

Specification
• Perimeter sealing cell door frames and windows.
• Supplied in ready to use 250 ml two pack, concentric cartridges.
• Mixed together as they are dispensed through a static mixer nozzle.
• Tack free in 90 minutes and fully cure (depending on joint thickness) in 48 hours.
• Jet washable, steam cleanable and paintable once cured.
• For ease of application it is recommended that a 25:1 ratio 310m1 hand cartridge gun or air powered cartridge gun is used.