Loading the content... Loading depends on your connection speed!
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 360° hemisphere mirror is designed for mounting on the ceiling, thus providing 200° of vision from any direction.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured in a steel flanged frame and fixed to the ceiling using tamper proof screws.
*This is the combined distance from the
observer to the mirror PLUS the distance
from the mirror to the object being
observed.
Finish
• Polyester powder coated frame.
Options
• Available in 450mm diameter (standard) or 600mm diameter (large).
HC0862S (standard)
450mm diameter (under 6m distance*)
HC0862L (large)
600mm diameter (over 6m distance*)
Specification
• Aluminium ligature resisting ‘infilled’ pull handle mounted on a plate.
• Infill plate prevents the introduction of ligatures.
• 25mm diameter x 225mm on 300mm x 75mm plate.
• Can be fixed with tamper resistant screws or bolted through the door for additional strength.
• Concealed fixings.
The HC0812 is ideal where the customer needs electric unlocking of deadlocks, without the worry
of handle overrides from the secure side. Fail open versions fitted to fire exit doors, linked into
fire alarm systems achieve fire safety with security.
Specification
• Standard 12v DC operation.
• Designed to suit dead bolt 10-15mm wide x 38mm height with 12-18mm throw.
• 2200lbs Strength.
Specification
• Constructed from 3mm thick unbreakable polycarbonate with scratch resistant coating, the 180° half hemisphere mirror is designed for mounting at high level, at the junction of the wall and ceiling, thus providing a wide angle view of the room.
• Foam backing block to prevent deformation of mirror.
• The mirror is secured a in steel flanged frame and fixed to the ceiling / wall using tamper proof screws.
To provide secure locking and a high level of security where the use of a handle is not required.
Specification
• Unique 5 detainer locking mechanism with thousands of key combinations.
• Steel deadbolt with 14mm throw.
• Anti-padsaw steel rollers.
• Built in protection against picking, drilling, force and torque attack.
• Steel key.
Specification
• Casings manufactured from solid Aluminium billet.
• 100% viewing aperture.
• Silent viewing of the occupant so there is no disturbance, unlike that of a
traditional hatch or viewer.
• Controls can be put in place to prevent viewing from non-authorised staff
or residents.
• Suitable for use in a new door and frame (secure integral wiring through
door & frame).
• Retrofit option is available for existing doors with operation from a built in
secure button and replaceable 9v battery.
• Tested to 30 minute fire resistance.
• The viewer is safe, ligature resisting and robust, designed for use in a
secure or detention environment.
• Polycarbonate on the secure side offers the required attack resistance
and prevention of damage to the glass.
• Audit trail through an access control system if required.
Specification
• Flexible elastomeric fin material springs back to original shape to provide ongo-ing performance and durability in service.
• Symmetrical design ensures fins are always in contact with two surfaces of the door leaf, creating an air chamber to provide excellent acoustic properties.
• Aggressive self-adhesive backing tested on many surfaces, including MDF.
• Effective smoke seal up to 200°C.
• Certified CF136.
• Weighted Sound Reduction (Rw): 31dB.
Specification
• Die-cast stainless steel.
• Robust design.
• Corrosion resistant.
• Can be mounted horizontal or vertical.
• Suitable for internal and external use.
• Designed to reduce risk of grabbing by prisoners / detainees.
• Designed to reduce risk of injury.
• Ergonomic design for comfort of use.
• W: 176mm H:100mm D: 30mm.
Specification
• Unique Anti-Barricade two way Door System.
• Provides unrestricted & immediate room access in an emergency or barricade situation.
• System utilises a frame within a frame principal, allowing for a standard 44mm or 54mm
door to be mounted within a secondary high security steel inner frame.
• Reduced ligature hinges & hardware, including anti-ligature end tips.
• Outer frame dual hook bolt locking with emergency key release.
• Rebated inner frame in robust preformed steel section.
• Suitable for standard high security door locks & hardware.
• Can be used with FD30S & FD60S fire doors.
• Designed for use with the concealed Perko Powermatic door closer HC0832.
A vertical sliding service hatch incorporating a polycarbonate viewing strip to ensure it is
safe to open the hatch fully.
Specification
• Home Office approved.
• Simple single handed operation – bottom latching.
• Vertical sliding hatch automatically latches closed.
• Cannot be opened from inside.
• Can be easily surface fitted to existing doors.
• Aperture size 264mm wide x 119mm high.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 360° full hemi-sphere mirror is designed for mounting on the wall, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is fixed to the wall using tamper proof screws provided.
• Weight 2.5kg.
• Overall size is 500mm diameter.
A vision panel specifically designed for dirty protest cell doors. It allows dirty lenses to be wiped clean to view into the cell and also provides a system to safely remove soiled lenses from the vision panel and replace with clean.
Specification
• Solid machined aluminium construction.
• Complies with NOMS specifications.
• Sliding privacy cover.
• 225mm high x 60mm wide clear vision.
Specification
• Electro-magnetic hold-open unit for fire doors when linked to a fire alarm system.
• Max door width 1100mm (HC0831A/D), 1250mm (HC0831B/E), 1400mm (HC0831C/E).
• Max door weight: 80kg (HC0831A/D), 100kg (HC0831B/E), 120kg (HC0831C/F)
• Adjustable sweep speed.
• Adjustable latching speed.
• Free swing option available.
• Successfully independently tested to BS EN 1155.
• CERTIFIRE approved for fire doors: CF117 ITT120/MM/IMM240.
Specification
• Constructed from 1.2mm thick mirror finished 304 stainless steel, the 90° half hemi-sphere mirror is designed for mounting at high level, at the junction of the wall and ceil-ing, thus providing a wide angle view of the room.
• Developed to meet the stringent requirements of the UK Home Office, Metropolitan Police and the Prison service.
• The mirror is secured in a steel flanged frame and fixed to the ceiling / wall using tamper proof screws provided.
• Weight 3kg.
• Overall size is 250mm wide x 250mm high.
To provide a means of securing wooden doors on offices and rooms where a range of suiting options is required, and/or where a high degree of protection against all known forms of vandal attack is needed.
Specification
• Steel Body.
• Brass deadbolt with 14mm bolt throw.
• Anti-padsaw steel rollers. Throw
• 5 lever mechanism with over a thousand key combinations.
• Built in protection against picking, drilling, force and torque attack.
• Brass key.
• Optional micro-switches for alarm systems integration.
• Can be suited as part of a master keyed system.
• Certified to BS3621.
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650