Loading the content... Loading depends on your connection speed!
Specification
• Ideal for use with Cell Security vertical outlet and squatting pans.
• 4 inch diameter with a 50mm water seal.
• Available in two types – P and S trap.
Finish
• High density polyethylene body.
• Inlet and outlet sealing rings from a proven synthetic rubber compound.
HC0758A
S Trap
HC0758B
P Trap
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel with access panel secured with security fixings.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Replacement electric syphon to fit HC0750 Pneumatic concealed cistern.
• Electronically operate delivering a measured volume of water upon activation.
• Typical 30% savings on water costs.
• Adjustable for optimum flush.
• Ideal for disabled or elderly.
• Easy to install and maintain.
• Vandal Proof.
• Built in overflow.
(Pictured with taps for illustration purposes only)
Specification
• Constructed as a totally enclosed unit in one piece without joints or crevices from 2mm
grade 304 Stainless Steel.
• Exposed surfaces of the basin are polished to a satin finish.
• The rear upstand is incorporated for ease of cleaning and hygiene.
• The basin's front panel extends downward to rear forming the under shroud that protects the supply and waste pipes with removable access cover secured with tamper proof fixing screws.
• 1″1/4 BSP male waste outlet connector.
• Two tap holes
• Blanking plug is also included if only one tap is required.
Specification
• Temperature Adjustment Range 30 C to 50 C.
• Temperature Stability +2 C.
• Maximum Inlet Temperature 85 C.
• Maximum Working Pressure 10 Bar : Static.
• Minimum Working Pressure 0.2 Bar : Dynamic.
• Inlet Temperature Range 52 C -65 C : Hot Supply.
• 05 C – 20 C : Cold Supply.
• Highly Resistant to Scaling.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• Constructed in one piece without joints or crevices from 2mm thick grade 304 stainless steel.
• Ligature resisting security flushing rim with a gap of less than 2mm.
• Filled with sound deadening fire retardant expanding foam to prevent drumming.
• Supplied with four M12 x 330mm long fixing bolts.
• Ergonomically designed contoured seat.
Specification
• Constructed from grade 304 Stainless Steel, the faceplate is 2mm thick and the basin / receptacle is 1.5mm thick.
• All edges of the faceplate are chamfered to avoid ligature attachment.
• Concealed spray head X2.
• 1″1/4 BSP male waste outlet connector welded to the underside of the basin.
• Fully concealed fixings with 4 off M12 X 150 long bolts (for walls up to 118mm thick).
• HC0728E is Provided with an electrical button x2 plus a solenoid valve.
• HC0728M is Provided with an mechanical timed flow push button valve x2.
NOTE – This product requires temperature controlled water supply (HC0745).
HC0728E requires an electronic control unit (HC0755B or HC0755D).
CSL Healthcare
Lynstock Way
Lostock
Bolton
BL6 4SA
Tel: +44 (0) 1204 669 690
Fax: +44 (0) 1204 669 650